EPIC4 Print Shop Plan

Cami runs a small screen printing shop that prints apparel for EPIC4's 20+ Partners, starting with a used shop for sale in Gering.

Prepared for Sami/team, November 16, 2026. All figures are typical ranges for a small manual shop, not quotes.

Summary

  • Buy the Gering equipment if the price is right. The press, belt dryer and washout booth are the expensive, hard-to-find pieces. What's missing costs roughly $4,000–10,000.
  • The 20+ Partners keep a shop busy part-time, not full-time. Outside work (Sturgis Rally, schools, local teams) is what turns it into a real income for Cami.
  • No full-time technician. Cami needs 2–3 days of hands-on training, an electrician to hook up the dryer, and part-time help for big runs.

The equipment for sale in Gering

Listed on the Scottsbluff Area Online Garage Sale group. The seller inherited a working screen printing business. Comments are off, so contact goes through a direct message.

Listed

  • Rotary (carousel) manual press with extra arms
  • Industrial belt dryer (cures the ink)
  • Washout station (cleans and reclaims screens)
  • Rolling baker's rack (staging shirts and screens)
  • Pretreat machine: only useful with a direct-to-garment (DTG) printer. Ask if one exists. Without it, skip it or resell it.

Not listed, still needed

  • Flash cure unit (required for multi-color on dark shirts)
  • Exposure unit (burns designs onto screens)
  • Screens, emulsion, cleaning chemicals
  • Film output (printer + film)
  • Squeegees, ink, mixing kit, small tools

What a small shop can produce

SetupRealistic output
One person, 1-color job60–120 shirts an hour printing; about 300–500 a day after screen setup and cleanup
Two people (printer + loader)150–250 shirts an hour; about 600–1,000 a day
Multi-color on dark shirtsRoughly half the above (white underbase, flash between colors)
  • Setup is the real cost, not printing. Each ink color needs its own screen. A 4-color job can take 1–2 hours of setup before the first shirt.
  • Best fit: 1–3 color jobs of 24–500 pieces. Very small orders (under 24) rarely pay.
  • The industrial dryer can outrun one manual press, so it leaves room to grow.

What 20+ Partners add up to

The deciding number is how many pieces the partners order in a year. Three scenarios:

Pieces per partner / yearAll 20+ Partners / yearPer weekShop days per monthPrint revenue / year*
1002,000~401–2$8k–12k
2505,000~1003–4$20k–30k
50010,000~2005–7$40k–60k

*At $4–6 per piece for printing; blank garments passed through at cost. Outside shops typically charge $3–8 per print plus setup fees. Ink and supplies run about $0.30–0.60 per piece. Shop days include screen prep and cleanup.

  • Even the high scenario is about a week a month. Partner work is a solid anchor, not a full-time job by itself.
  • Getting each partner's yearly count is step one. A quick survey of the 20+ Partners answers it.

How partner orders would work

  • Orders and tracking in EPIC4portal. Partners place and track orders in the portal, so Cami can coordinate everything from South Dakota, wherever the equipment sits.
  • Screen library. Every design gets its own screens: partner logos and each partner's individual promo pieces. Screens for designs that repeat stay on a labeled rack, so reorders skip most of the setup; one-off promo screens get reclaimed and reused. Plan on 40–60 screens.
  • Ink colors. 20+ Partners means too many colors to stock. Keep base colors on hand and mix each partner's Pantone colors with a mixing kit. Keep leftover mixed ink labeled by partner.
  • A simple order menu. A few shirt and hoodie styles, front/back/sleeve print spots, a 24-piece minimum, and 10–14 business days of lead time.
  • Artwork. Each order comes with print-ready art, one vector file per design (AI, EPS, PDF or SVG). Cami keeps repeat designs on file with their screens.
  • Blank garments come from wholesale distributors (SanMar, S&S Activewear), 2–3 days by ground to either location.
  • Not a fit for screen printing: hats and embroidered polos. Send those to an embroidery shop.
  • Shipping to partners. If partners are spread out, finished orders ship by UPS from either location, so this doesn't favor one town.

Ink plan

  • Plastisol ink to start. It doesn't dry in the screen, keeps for years sealed, and forgives beginner mistakes. It cures at about 320°F in the dryer.
  • Coverage: 1 gallon prints about 700–1,000 standard front designs on light shirts, far fewer on dark shirts.
  • Starter stock: 2–3 gallons of white (the most-used ink by far), 1 gallon of black, base colors for mixing, plus reducer and clear base.
  • Reorder any color under half a gallon. Suppliers ship in 2–4 days, so stock one big job ahead and no more.

Startup costs beyond the Gering equipment

ItemApprox. cost
Flash cure unit$400–1,500
Exposure unit$500–2,500
Screens, 40–60 aluminum, mixed mesh (110 / 156 / 230)$1,000–1,800
Emulsion, scoop coater, degreaser, reclaim chemicals$250–400
Film output (inkjet printer + film)$300–1,000
Starter ink stock$500–900
Pantone mixing kit + scale$400–800
Squeegees, pallet adhesive, tape, spot cleaning gun$200–400
Screen drying cabinet, screen storage rack$200–800
Temperature strips / infrared thermometer$50–100
Total~$4,000–10,000

Not included: the Gering asking price, an electrician for the dryer ($500–2,500), and moving the equipment if it goes to South Dakota ($500–1,500).

Any shop space needs

  • 240V power, likely 30–60 amps, for an industrial dryer. Check the dryer's plate.
  • Water and a sewer drain for the washout booth. Not a septic system.
  • Heat in winter. Ink and emulsion misbehave below about 60°F.
  • Ventilation for the dryer and flash unit.
  • About 400–600 sq ft for press, dryer, washout, screen area and shirt staging.

Where to run it

Scottsbluff (Webb garage)

Pros

  • The equipment is already in Gering, so there's no 200-mile move.
  • Free space.
  • Sami/team are on site for oversight and pickups.
  • Cami can take orders from South Dakota through EPIC4portal, then come down to print collected orders in 2–3 day batches.
  • About 3 hours to Denver.

Cons

  • Cami doesn't live there. She'd have to move or drive about 3 hours each way.
  • If Cami is remote, Sami/team end up running the shop.
  • The garage likely still needs 240V, a drain and heat.
  • A shop in a family garage brings noise, fumes and access questions. Agree up front who pays for power and heat.

Whitewood or Spearfish

Pros

  • Cami runs it every day with no move.
  • Sturgis Rally is next door. August rally merch is a big seasonal print market. Black Hills State, schools, teams and tourist shops add more.
  • Spearfish and Rapid City have small shop spaces for rent.
  • Carrie (Cory's wife) may be able to help on big runs, though not on a steady schedule unless she changes jobs to work at the shop full-time.

Cons

  • The equipment moves about 200 miles. That means a trailer, a crew, and maybe taking the dryer apart.
  • She needs a space: her own garage (same power, drain and heat checklist) or a rented bay ($500–1,200 a month).
  • Farther from Sami/team.
  • South Dakota business and sales tax registration.

Staffing: does Cami need a technician?

  • No full-time technician. A manual press can be learned. Expect 2–4 weeks to clean 1-color work, and 2–3 months to consistent multi-color on dark shirts.
  • Electrician: required once, to hook up the dryer.
  • Training: 2–3 days hands-on, ideally from whoever ran the Gering shop, or a paid class from a supply company ($300–1,500).
  • Help on big runs: a second person roughly doubles output. Plan for Cami working solo. Carrie is a possible extra hand, but not a steady one unless she changes jobs to work at the shop full-time, so line up a part-time helper she can call for large orders.

Decisions for EPIC4

  1. Structure: Cami as an EPIC4 employee, or her own business with EPIC4 partners as anchor customers. Her own business lets her sell to outside customers too.
  2. Who pays for each order: EPIC4, or each partner directly.
  3. Startup budget: the Gering price + ~$4,000–10,000 in supplies + electrical + any move.
  4. Location: Scottsbluff or Whitewood/Spearfish.
  5. Partner volume: survey the 20+ Partners for yearly piece counts before buying.

Questions for the Gering seller

  1. Asking price, for each piece and as a bundle?
  2. Press: brand, model, and how many colors and stations?
  3. Dryer: brand, belt width, chamber length, voltage, amps and phase, gas or electric?
  4. Washout booth: does it include a pressure washer? How is it drained?
  5. Pretreat machine: was there a DTG printer with it?
  6. Anything else in the shop: flash unit, exposure unit, screens, ink, squeegees?
  7. When did it last run? Can we see it power up?
  8. Who ran it before, and would they do a day or two of training?
  9. Loading: can it come apart, and is there dock or forklift access?

Estimates are typical ranges for small manual screen printing shops as of 2026. Confirm prices with the seller and suppliers before committing.